SDX /REBAR
TOOLS

SDX Rebar Tools

Rebar Cage Assembly

Cage assembly places the tool close to adjacent reinforcement. Separate length adjustment, cage-head bending and prepared coupler assembly so each operation has the right working access.

A grey connection tool at a coupler among the longitudinal bars and hoops of a rebar cage

SDX Tools video frame · Coupler connection work within a reinforcement cage.

Photo credit & source

Powerful cordless rebar connection electric wrench — SDX Tools. Official video. Company-authorized footage.

Cropped, proportionally resized and converted to WebP. Frame: 7.500 s in the source recording; the official edit may use a different timeline. The exact tool model is not identified.

Download this image · View full frame

Inside and around a reinforcement cage

Trim bars, work at cage heads and assemble coupler connections.

Cold-cutting saws · HRB benders · Coupler wrench

Discuss this Application

01

Cutting access

A cold saw needs room for the blade and tool at the intended cut. Choose by bar size and the actual opening.

02

Cage-head bending

The HRB range covers six diameter ranges for bending and straightening tasks. Review the bar position and approved bending requirement.

03

Coupler assembly

The SDX-400RL lists reinforcing-cage connections among its configurations. Check coupler outside diameter and the approach of the tool.

A matching diameter does not establish minimum clearance. Review the cage drawing and connection-system procedure before ordering.

Models for these tasks

Compare the listed ranges with your workpiece and installation requirements.

Coupler Connection

Cutting

Bending / Straightening

Explore all seven connection tools → for other gripping and turning requirements.

Related selection guide →