Cut a bar
Compare SDX-300CT (up to 32 mm) and SDX-500CT (up to 50 mm).
SDX Rebar Tools
How to Choose Rebar Tools
Choose by the operation first, then narrow the range by dimensions, access and power. These examples show how to read the catalog without confusing different capacity ratings.
Model selection at a glance
Bend or straighten
Compare the six HRB bar ranges; confirm the task and current configuration.
Connect prepared threads
Compare the three coupler models by bar and coupler diameter; review the four Pipe-platform models by actual clamping surface and opening.
Read each dimension in context
A saw blade diameter is not its bar capacity: SDX-300CT uses a 110 mm blade and lists rebar up to 32 mm. A wrench clamping opening and a coupler outside diameter also describe different things.
Shortlist, then check the work position
A dimensionally matching model is a candidate. The installed bar position, surrounding reinforcement and supplied power configuration determine the next selection questions. Use the model page for complete specifications and a technical inquiry for the actual arrangement.
Describe the work area
State site or workshop, available power, working clearance and bar position. A marked drawing can help the later technical exchange.
Confirm the scope
Discuss configuration, quantity and destination after technical fit. Do not infer compatibility from one capacity number.
Relevant models
SDX-400RLB
Applicable rebar: 8–40 mmCoupler outer diameter: 24–47 mm
SDX-300CT
Cutting capacity: Rebar up to 32 mmSaw blade diameter: 110 mm
SDX-HRB-25
Bending range: 4–25 mmPower: 1,200 W