SDX-300CT
Up to 32 mm rebar; 110 mm blade diameter.
SDX Rebar Tools
Rebar Cutting Methods
Select a cutting method by the bar, cut location and next operation. The SDX range covers handheld cold saws; compare other methods using their own manufacturer specifications.
Model selection at a glance
SDX-500CT
Up to 50 mm rebar; 145 mm blade diameter.
Other methods
Ask the relevant supplier for material, capacity and consumable evidence. No comparative performance test is claimed.
Separate blade size from cutting capacity
SDX-300CT lists rebar up to 32 mm with a 110 mm blade. SDX-500CT lists rebar up to 50 mm with a 145 mm blade. A 40 mm bar is beyond the 300CT limit; the 500CT is the dimensional candidate, subject to material and blade suitability.
Match the method to the remaining operation
When bars arrive cut and threaded, connection may be the remaining task. When length adjustment is required, first establish the intended cut location and what preparation must follow it. The tools in this catalog do not perform thread cutting or rolling.
Understand this catalog
This range includes handheld cold-cutting saws. Their blade diameter and bar capacity are separate parameters.
Confirm before procurement
Ask the supplier to identify the exact model, blade and power configuration. Evaluate alternatives using comparable conditions rather than unqualified speed claims.
Relevant models
SDX-300CT
Cutting capacity: Rebar up to 32 mmSaw blade diameter: 110 mm
SDX-500CT
Cutting capacity: Rebar up to 50 mmSaw blade diameter: 145 mm